Work from the meter outward
A storm often brings a utility outage. If the grid is down the inverter will intentionally shut down, and that is not a fault. Confirm utility power first so you do not pay for a diagnosis of a blackout.
Each step removes a category of cause before you climb anything.
| Order | Check | What it tells you |
|---|---|---|
| 1 | Utility power and meter | Whether the grid is back and the service is intact |
| 2 | AC disconnect position | Whether the array was switched off during storm work |
| 3 | Solar breaker in the main panel | Whether a surge tripped it |
| 4 | Inverter display or app alert | What the inverter thinks happened |
| 5 | Visual inspection from the ground | Whether anything is visibly damaged or displaced |
What to look at from the ground, and only from the ground
- Panels that are visibly displaced, cracked, or sitting out of line with their neighbours.
- Conduit that is hanging, crushed, or pulled away from a fitting.
- Debris on the array, especially anything that could abrade or shade.
- Water staining on the ceiling below the array, which suggests a penetration leak.
- Anything that looks scorched, or any smell of burning near equipment.
Why storms cause ground faults
Wind-driven rain finds connector seals and enclosure gaskets that were marginal before the storm. When water reaches a DC conductor or a connector, the inverter detects a path to earth and shuts down by design, which is why a post-storm system sometimes shows a ground or isolation fault rather than a simple dead array.
That fault is the system protecting itself. Resetting it puts voltage back onto a wet fault, which is exactly how a small leak becomes a fire.
If there is real damage, document before you repair
Photograph everything before anything is moved: the array from several angles, the roof surface, the equipment, and the interior staining if there is any. Note the date of the storm and keep the utility outage records.
Ask whether the work is an insurance claim before authorising a repair, because the evidence standard is different and a repair that starts before an adjuster sees it can complicate the claim.
- Photograph before touching anything.
- Write down the storm date and when production stopped.
- Keep utility outage notices and any restoration timestamps.
- Ask the service provider to document findings in writing with photos.
After the fix
- Confirm production returns on a sunny day and compare it with the same period before the storm.
- Ask for the monitoring history to show the recovery, not just the repair invoice.
- Have the roof inspected at the penetrations if there was any interior staining.
- Note any code that appeared after the storm in case it recurs at the next weather event.